Connecting your hardware:

ELO Stand – You are provided four screws to attach the stand to the ELO.  You can set in two different positions.  Please note that the swivel function purposely is built with some resistance.  

Keyboard & Mouse – These plug into your ELO (you will remove the panel on the back of the ELO to access various ports)

Cash Drawer – The end that looks like a phone jack plugs into the port underneath the cash drawer.  The other end plugs into your thermal printer

Poynt Terminal – The square end plugs into your thermal printer and the USB end plug into the Poynt docking station.

Scanner – This is bluetooth so it need not plug into anything.  You are provided a cord for charging purposes.

Change default printer settings from Poynt to Receipt Printer:

  1. From the Poynt terminal swipe down then swipe left (blue menu bar) and go into settings

  2. Select Receipt Printer Preferences

  3. Select the Star Printer TSP100 and check mark the box Default to Poynt Printer on failure

  4. Close


  • Before you activate your Poynt terminal, please make sure it is fully charged (must see green light on AC adapter to ensure it is charging). This allows for a successful activation.

Need to purchase more hardware?